1. Function introduction
realme UI 3.0 brings the Car connect. After connecting your phone to the car via Bluetooth, you can use navigation, calls, music and other functions smarter and safer while driving the car.
Supported models: realme GT2 Pro (A.18 and above). Please look forward to other models.
Information sharing: The schedule and itinerary on the phone will be automatically synchronized to the central control screen of the car.
Navigation sharing: After the phone is connected to the car, open the map application on the car and the navigation application on the phone will automatically continue the navigation.
Audio sharing: After the phone and the car device are connected, the audio played on the phone will automatically continue to be played on the car device.
2. Operation path
Go to Setting > Connection & sharing > Car connect
3. Connection method
Car connection supports two connection methods: Wireless connection and USB connection.
3.1 Wireless connection：
(1) Turn on the Bluetooth of the phone;
(2) Find the ICCOA Car link entry on the car side (generally, it is in the application list of the car and the location may be different for different cars). Click ICCOA Car link to enter the pairing code display page;
(3) The car connection pop-up box pops up on the phone, click connect to enter the pairing code (only the first time you need to enter the pairing code);
(4) Enter the pairing code successfully and enter the connecting page. After the connection is successful, the car terminal will automatically open the screen cast page.
3.2 USB connection：
(1) Use the USB data cable to connect the car and the phone;
(2) Find the ICCOA Car link entry on the vehicle end (generally, it is in the application list of the car and the location may be different for different cars). Click on ICCOA Car link.
(3) The car connection pop-up box pops up on the phone, click connect (only when the first connection is a USB connection) and automatically enter the screen cast page.
4. FAQ
How to deal with connection failure? Please refer to the following methods.
When the USB connection fails:
(1) Please unplug the USB cable and then reconnect.
(2) Confirm the USB selection mode, please select the "Charge only" or "File transfer" option under the connection.
When the wireless connection fails: If a pop-up box prompts that the connection fails, please re-initiate the connection on the car end.
